Site

This site is about to go down. The entire database is going to be wiped.

Probably be back in a bit though. :P

Old UT Skins

Here are some old skins I made way back in 2000 for the UT engine.
I had only just started using a PC again and so these are pretty bad, but not too bad considering these were my first steps.
It is kinda embarrasing but feck it here are my first skinning attempts ev4r!First one is on the Xan boss model and is meant to be a skater dude with a backpack and beanie on, with headphones over the top.

Second one is one I did a little while later and is obviously a little better too
This was the commando skin I think… so long ago now. Anyways I tried to make some kind of future tech. Yakuza.

Stick art

I made a few design for joysticks.

   

New PC

Well after a fair bit of fighting with various components, my new PC is built and ready to rumble.
Here are a couple of shots of it.

PC in boxes (before)

Well chiddlers, this will be my last post on this here PC.

For the last… oh I’d say 7 months I’ve been operating on this totally kaput PC.
It’s been more than annoying to say the least. ‘Control + S’ is second nature as this damned rig has been doing nothing but crash every half hour for the afore mentioned 7 months.

It took me a while to buy new parts, but they have all finally arrived! (bar my GFX card which is being driven here as I write these lines) yay!

So here is a ‘before’ picture of all my parts in boxes and if all goes well I should be able to post an ‘after’ pic. by late tonight. (though building a PC and re-installing all the proggies always takes way longer than anticipated)

What you see there is:
Black Antec P182 Midi-Tower
ASUS VW202S, 20″ Montior (1680×1050)
ASUS P5N32-E SLI nForce Motherboard
Intel Core 2 Quad Q6600 95W, 4x 2.40GHz, 2x 4MB shared Cache CPU
2 GB of Crucial Ballistix RAM
Enermax Liberty 620W PSU
Noctua NH-U12F CPU Fan
And what you don’t see in that pic is the Leadtek WinFast GeForce 8800 GTX, 768MB Graphics card.

Granted it all looks a bit stale in boxes but it should look all the better once I’ve put it all together.

Hopefully see you soon.